The disassembly techniques for micro water pumps are very important for repairing and maintaining them. The following are the basic steps for disassembling a micro water pump:

1. Prepare tools

Disassembling a micro water pump requires the use of basic tools such as screwdrivers, wrenches, pliers, etc. Prepare these tools in order to effectively disassemble the micro water pump.

2. Power outage

Before disassembling the micro water pump, be sure to disconnect the power supply to avoid danger such as electric shock.

3. Remove the casing

Use tools such as a screwdriver and wrench to remove the housing of the micro water pump. Be sure to disassemble the screws in order to avoid damaging the components.

4. Remove the bearing of the water pump

After removing the casing, the water pump bearings can be seen. Use pliers and other tools to remove the water pump bearing. When disassembling the bearings of the water pump, disassembly is necessary when repairing or cleaning the micro water pump. The micro water pump can be easily disassembled using the following steps:

Use a wrench or screwdriver to remove the pump body cover and remove the internal structure of the pump body, including the impeller and rubber sealing ring. Clean the internal structure of the pump body with a cleaning agent to ensure there is no blockage or corrosion. Reinstall the internal structure of the pump body and reinstall the pump cover.

Micro water pumps have a wide range of applications. By understanding its working principle and disassembly techniques, it is possible to better maintain and maintain the micro water pump. Of course, when disassembling the micro water pump, it is necessary to pay attention to safety to avoid injury.