The principle of pet automatic water dispenser








With the development of science and technology and social progress, people's quality of life is getting higher and higher, and the level of intelligence in daily life is also increasing. The requirements for the use of many devices are also increasing. At the same time, with the increasing number of people keeping pets, the issue of pet drinking water is also receiving more and more attention from people. Water is the source of life and an important substance that many lives rely on for survival. Therefore, it is necessary to ensure the quality of drinking water and enable pets to have a healthy life.




The existing technology of pet water dispensers can achieve water circulation and filtration according to certain program settings, but they have not been able to achieve the working state of the automatic control device. Continuous operation without water not only wastes resources, but also causes significant damage to the device in the long run and poses safety hazards.




Regarding the intelligent pet filter water dispenser, it includes a base, a water storage bucket, a water pump, an outlet pipe, an outlet, a control module, and a sensor. The water storage bucket is a water storage space located above the base, and the two are combined together by screws. A through-hole is provided on the water storage bucket; The water pump and sensor are both installed at the bottom of the water storage bucket, and a corresponding circuit board is installed on the base. One end of the water outlet pipeline is connected to the water pump, and the other end is connected to the water outlet.




The sensor is connected to the power switch of the water pump through a control module, including a first end and a second end. The first end of the sensor is equipped with a light-emitting diode and a photosensitive receiver, and the second end of the sensor is equipped with a reflector. The first end and second end of the sensor are spaced apart, and the reflector can reflect the light emitted by the light-emitting diode back to the photosensitive receiver; The control module is respectively connected to the water pump and sensor, and further includes a water filter tray, a filter element, and a filter element tray.


The water filter tray is arranged below the water outlet, and the water filter tray, filter element, and filter element tray are sequentially arranged on the through-hole on the surface of the water storage bucket from top to bottom. The filter element tray is equipped with a filter hole connected to the through-hole of the water storage bucket, and water can flow to the filter element tray through the water filter tray and filter element, and flow into the water storage space through the filter hole


LAST: Working principle and structure of pet water dispenser water pump NEXT: Pet automatic water dispenser water pump

Recommended News